Application

The New Hydraulic Open Box Sand Making Machine is widely used for fine crushing of granite, basalt, limestone, river Pebbles, cement clinker, quartzite, iron ore, bauxite and other minerals.  It is also used in the production of stone materials for mechanism artificial sand making, high grade highway, railroad, water conservancy, airport, construction, cement, refractory material, gold treatment and other industries.

Hydraulic open box sand making machine is improved on the basis of the product river pebble sand making machine. It takes 1-2 hours to open the back cover for one or two hours for the traditional sand making machine because there is no hydraulic booster system. The new design of hydraulic cover opening sand making machine solves this problem. One key to open the cover of the sand making machine. The hydraulic sand making machine can open the back cover within one minute. After opening the cover, it is not only convenient to replace the hammer head, side plate and top cover, but also can solve the clogging problem faster.

Features

1. Large-scale production, suitable for handling capacity of 50-300 tons/hour of large-scale production.

2. The production cost is low, the production cost of finished sand and stone is only 4 of the conventional production line

3. High crushing ratio, high degree of automation, low energy consumption, high crushing ratio.

4. Good plasticity, with plastic function, product into a cube-shaped, particle size, fine particle size of finished products, in line with the standard.

Main components

Processed Materials

Hydraulic box opening sand making machine is widely used for fine crushing of various minerals such as limestone, dolomite, shale, diabase, concrete, gypsum, silica sand, basalt, bauxite, iron ore, granite, cobble, pebble, cement clinker, quartzite, etc.

Working Principle

When the material enters the crusher, it is crushed into small pieces by the high-speed impact of the impact plate on the rotor. Then, the crushed material is thrown towards the impact plate inside the crusher for secondary crushing. After repeated impacts and crushing, the material is finally crushed to the required particle size and discharged from the bottom of the machine. By adjusting the gap between the counterattack plate and the rotor, the particle size and shape of the finished product can be changed.

Specifications

Working Video of Hydraulic Open-Box Type Sand Making Machine

Customer cases